User's Manual

Chapter 3 — Configuring the CK60 Computer
CK60 Series Handheld Computer User’s Manual 67
Basic
Use the Basic page to set the network type, name, and manage battery
power for this profile. Tap ok or OK to return to the Profiles page.
Security
The following are available from the 8021x Security drop-down list. Note
that the last four methods are available if you have purchased the security pack-
age. Contact your Intermec representative for information.
•None (next page)
•PEAP (page 70)
•TLS (page 75)
•TTLS (page 79)
•LEAP (page 383)
Profile Label Enter a unique name for your profile.
Network type Tap the drop-down list to select either “Infrastructure” if your
network uses access points to provide connectivity to the corporate
network or internet; or “Ad-Hoc” to set up a private network with
one or more participants.
Channel If you select “Ad-Hoc” for the network type, select the channel on
which you are communicating with others in your network. There
are up to 11 channels available.
SSID
(Network
Name)
This assumes the profile name unless another name is entered in this
field. If you want to connect to the next available network or are not
familiar with the network name, enter ANY" in this field. Consult
your LAN administrator for network names.
Enable Power
Management:
Check this box to conserve battery power (default), or clear this box
to disable this feature.