User's Manual

Chapter 3 — Configuring the CK60 Computer
66 CK60 Series Handheld Computer User’s Manual
Configuring Your Wireless Network
A profile contains all the information necessary to authenticate you to the
network, such as login name, password or certificate, and protocols by
which you are authenticated.
You can have up to four profiles for different networks. For example, you
may have different login names or passwords on different networks, or you
may use a password on one network, and a certificate on another.
Use the Profiles page to select and configure between the networking envi-
ronments assigned to this 802.11b/g radio.
To start 802.11b/g communications on the CK60 Computer, tap Start >
Settings > Control Panel, then double-tap the Wireless Network icon to
access the Profile Wizard for the 802.11b/g radio module.
Profile Tap the drop-down list to choose between four different profiles assigned to this unit, then tap Edit
Select Profile, make the changes needed for this profile (starting on the next page), then tap OK to
return to the Profiles page.
Enable
Microsoft's
Wireless Zero
Config
Check this box to enable Microsoft's Wireless Zero Config application. This effectively disables the
Intermec software solution for 802.11b/g, including configuration via the Wireless Network control
panel applet.