User's Manual

Chapter 3 — Configuring the CK60 Computer
62 CK60 Series Handheld Computer User’s Manual
Creating an SF51 Connection Label
To initiate a connection from the SF51 Scanner, use your EasySet applica-
tion to create an SF51 connection label with the CK60 Bluetooth address.
The device address is listed in the Local Bluetooth control panel applet on
your CK60 Computer, like the illustration shown on the previous page.
2 In the left side of the EasySet application, double-click Data transmis-
sion settings > Bluetooth parameters > connect/disconnect > compose
BT address.
3 Enter the Bluetooth address assigned to your CK60 Computer (shown
in your Local Bluetooth control panel applet), then click OK to close
this dialog.
1 On your desktop or laptop, double-click the EasySet icon to activate the
EasySet application if you have not already done so.