User's Manual

Chapter 3 — Configuring the CK60 Computer
CK60 Series Handheld Computer User’s Manual 61
Configuring the SF51 Scanner
The following information pertains to configuring the SF51 Scanner to
work with you CK60 Computer. These instructions assume you have the
EasySet application installed on your desktop or laptop. The EasySet appli-
cation is available from the Intermec Data Capture web site, contact your
Intermec representative for information about this application.
Enabling Bluetooth
Bluetooth is required for the SF51 Scanner. On the CK60 Computer, use
the Local Bluetooth control panel applet to enable Bluetooth communica-
tions before you configure the SF51 Scanner.
3 Tap OK to close the applet.
1 Select Start > Settings > Control Panel, then double-tap the Local Blue-
tooth icon.
2 Tap the top button to On, check Connectable, then take note of the
device address. You will need this address to create your SF51 Connec-
tion Labels. Instructions start on the next page.
Tap this to “On“
Check to enable “Connectable”