User's Manual

Chapter 3 — Configuring the CK60 Computer
CK60 Series Handheld Computer User’s Manual 55
Its key features are robustness, low complexity, low power, and low cost.
The technology offers wireless access to LANs, the mobile phone network,
and the internet for a host of home appliances and portable hand-held
devices located up to 100m (328ft) apart (in a line of sight environment).
Local Bluetooth
The Local Bluetooth control panel applet displays the device name, the
device address, enables or disables Bluetooth communications, and sets dis-
coverable and connectable settings. This also provides a versions screen for
various Bluetooth items in the system.
Use this applet to enable Bluetooth communications before you configure
radio communications.
Wireless Printing
The Wireless Printing control panel applet separates the task of wireless
printing from other Bluetooth management items not relevant to this task.
Wireless Printing has a concept of the “current wireless printer.” This
printer is the one to which the CK60 Computer makes a connection when
the wireless printing COM port is opened. If there is no current wireless
printer, there is no wireless printing COM port. Registration and deregis-
tration of this COM port is controlled by BTCC. Use the Wireless Printing
control panel applet to handle the COM port registration. Customer soft-
1 Select Start > Settings > Control Panel, then double-tap the Local Blue-
tooth icon.
2 Tap the top button to On, then tap OK to close the applet.
Device Name Provides the “friendly” name of your CK60 Computer.
Device Address Universally unique and cannot be changed - read-only.
Discoverable Check this to ensure your CK60 is discoverable to other Bluetooth devices. The default is for the
CK60 Computer to be undiscoverable as it does not offer any incoming services out of the box.
Connectable Check this to allow other Bluetooth devices to connect to your CK60 Computer. The default is for
the CK60 Computer to be unconnectable as it does not offer any incoming services out of the box.
Class of Device This sets how a CK60 appears to other devices during a device discovery. The default is “0x920100”
which specifies that the CK60 is capable of services of information, object transfer, and networking.
Tap this to “On”