User's Manual

Chapter 3 — Configuring the CK60 Computer
CK60 Series Handheld Computer User’s Manual 41
5 Within the “Mobile Device” folder, go to the folder where you want the
files located on the CK60 Computer, do a right-click for a pop-up
menu, then select Paste.
6 When all of the files are pasted, perform a warm-boot on the CK60
Computer. When the computer reboots, wait for the LED on the top
left of your keypad to stop blinking. Tap Start > Programs > Windows
Explorer to locate the newly copied executable files, then tap these files
to activate their utilities.
Installing Applications Using a Secure Digital Card
If you have an SD card for your CK60 Computer, this is the best place for
you to install applications.
1 If you are using an SD card reader, suspend the CK60 Computer,
remove its SD card, and place it in the reader. For help, see “Using the
Secure Digital Card” on page 15.
2 Copy your application file to the SD card. If you are using Microsoft
ActiveSync to copy the files to the SD card, place the application in the
“\Storage Card” folder on the CK60 Computer.
3 If using an SD card reader, insert the SD card back into the CK60.
4 Navigate to the “\Storage Card” folder and run your application. After
your application is installed, you can run it from the Programs menu.
3 Click Explore to access the “Mobile Device” folder on your unit.
4 From your PC, select Start > Windows Explorer, then browse the
“C:\Intermec\CK60 Mgmt Tools\CabFiles” path for any CAB files
needed for your CK60 Computer. Select the appropriate file, right-click
the file for a pop-up menu, then select Copy.