User's Manual

Chapter 1 — Using the CK60 Handheld Computer
CK60 Handheld Computer with Windows CE User’s Manual 15
Using the Secure Digital Card
You can use a Secure Digital (SD) card to increase file storage and install
software. The CK60 Computer currently supports SanDisk SD cards only.
The SD card slot is located on the top of the CK60 Computer just above
the scanner window.
To insert an SD card:
1 Press I to turn off the CK60 Computer.
2 Remove the two screws on the SD card slot door and remove the door
(see illustration on the next page). Note that the screws to this door are to
be torqued to 1.5 in-lbs.
3 Gently insert the SD card into the CK60 Computer with the printed
side facing the keypad and screen side of the CK60 Computer.
4 Push the card into the slot until it latches in place and the steel card
retainer covers the end of the SD card.
5 To replace the door, insert the door catch into the slot above the steel
card retainer.
6 Replace the two screws.
7 Press I to turn on the CK60 Computer.
To remove the SD card:
1 Press I to turn off the CK60 Computer.
2 Remove the two screws on the SD card slot door and remove the door.
Note that the screws to this door are to be torqued to 1.5 in-lbs.
Note: MultiMediaCards (MMCs) and CompactFlash (CF) storage cards
are not supported in the CK60 Computer.
Warning: You can corrupt your SD card if you do not follow these
installation and removal procedures exactly.
Screw
Screw