User's Manual

Chapter 1 — Using the CK60 Handheld Computer
CK60 Handheld Computer with Windows CE User’s Manual 13
Using the Speakers
The high-volume speaker on the back of the CK60 Computer, is capable of
variable volume levels. This speaker is capable of reproducing voice and
WAV files, and is used primarily to convey status tones. There is a separate
volume control in the Volume & Sounds control panel applet. Information
on this applet is below and on the next page.
The front speaker is a full-voice range speaker of cell-phone quality with a
separate volume control. See the next page for information about this vol-
ume control.
Enabling the Speaker and Adjusting the Volume
2 Drag the slider bar to the right to the “Soft” position.
Warning: Do not place the speaker next to your ear when the speaker
volume is set to “Loud” (maximum), or you may damage your hearing.
To enable the speaker and adjust the volume:
1 Tap Start > Settings > Control Panel. Double-tap the Volume &
Sounds icon, then tap the Volume tab.
High-volume speaker on center, back
of CK60 Computer
Front Speaker