User's Manual

Chapter 4 — Maintaining the CK60 Computer
98 CK60 Series Handheld Computer User’s Manual
Networking Test
This test validates each required level of network connectivity. Tap Start
Te st to begin the validation. Press Esc to exit.
A green check mark indicates a validation; a blue question mark indicates
the feature was not tested; a red “X” indicates the validation failed; a dashed
arrow indicates the feature being tested.
Read CPU Registers
Use this to read the CPU registers available in your CK60 Computer, then
create a log file listing the registers. Tap Start Test to read the CPU regis-
ters, then select any of the registers from the Register ID drop-down list to
view its register address and register value. Press Esc to exit.