User's Manual

Chapter 4 — Maintaining the CK60 Computer
94 CK60 Series Handheld Computer User’s Manual
Upgrading the Operating System on your CK60 Computer
You can use the Intermec Recovery Tools CD to reinstall or upgrade the oper-
ating system software on the CK60 Computer. For more information, con-
tact your Intermec representative for more information about this CD.
When you upgrade the operating system, you erase the current configura-
tion and replace it with the new default configuration. You will need to
reset the network parameters on the CK60 Computer to reestablish com-
munications with other devices in the network. In other words, if you
upgrade the operating system and the default registry from the operating
system has changed, the registry is rolled back to the new default.
Running Diagnostics on Your CK60 Computer
Frontlight Test
Use this test to ensure that your frontlight functions properly. It turns the
frontlight on and off and sets brightness levels.
This test performs a series of tests on the screen frontlight. Tap either Pass
or Fail to confirm the results of each test before continuing. A green check
mark indicates a pass; a red “X” indicates a fail. The dashed arrow indicates
the action being tested.
Battery Information
Use this test to view information about the battery voltage, charge levels,
and AC line detection. The test would take less than a minute.
Use the Intermec Diagnostics control panel applet on the CK60 Computer
to analyze firmware problems and view system information. Tap Start >
Settings > Control Panel, then double-tap the Intermec Diagnostics icon
to access these tests and information. Select the appropriate test, then tap
Start Test to begin. Press Esc to exit any of the tests.