User's Manual

Chapter 3 — Configuring the CK60 Computer
90 CK60 Series Handheld Computer User’s Manual
Using Configuration Parameters
A configuration parameter changes the way the CK60 Computer operates,
such as configuring a parameter to have the CK60 Computer emit a very
loud beep in a noisy environment. Use any of these methods to execute
configuration parameters:
Scan EasySet bar code labels:
You can use the EasySet application from Intermec Technolo-
gies Corporation to print configuration labels. Scan the labels
to change the imager configuration and data transfer settings.
For more information, see the EasySet online help.
Send Reader Commands through the Network or from an Application
You can configure parameters by sending the following reader
commands through the network or from an application. See
“Using Reader Commands” on page 91 for more information.
Reader
Command
Description
Options (Syntax Data
for Reader Commands)
Audio
Volume
Changes the volume of all audio signals 0 - Off
1 - Low
2 - Medium (default)
3 - High
4 - Very high
Automatic
Shutoff
Sets the length of time the CK60 Computer remains on when there is no
activity. When you turn on the CK60 Computer, it either resumes
exactly where it was when you turned in off or boots and restarts your
application.
1 - 1 minute
2 - 2 minutes
3 - 3 minutes (default)
4 - 4 minutes
5 - 5 minutes
Backlight
Timeout
Sets the length of time that the display backlight remains on. If you set a
longer timeout value, you use the battery power at a faster rate.
0 - Disable
10 - 10 seconds
30 - 30 seconds
60 - 1 minute (default)
120 - 2 minutes
180 - 3 minutes
240 - 4 minutes
300 - 5 minutes
Date/Time Sets the current date and time. Date
Year - 0000-9999 (1999)
Month - 1-12 (6)
Day - 1-31 (1)
Time
Hour - 0-23 (0)
Minute - 0-59 (00)
Second - 0-59 (00)