User's Manual

Windows Device Configurations—Chapter 4
75CV60 Vehicle-Mount Computer User's Manual
Tethered Scanner
The Intermec Tethered Scanner feature allows Automatic Data Collection
(ADC) by accepting data from the COM1 port and wedging it into the
keyboard interface. This feature is enabled or disabled via the Intermec
Settings and Settings control panel applets.
Windows CE
Enabling and Disabling
From the CV60 desktop, select Start > Settings > Control Panel, then
doubleĆclick the Settings desktop icon. Click the Com Ports tab, then
click Com 1 Ć 5 Volt Enabled to activate the tethered scanner. See page 44
for more information about this control panel applet.
Scanner Cabling
Sabre 1551E / 1553 Cables connect directly to the CV60 COM Port.