User's Manual

Windows Device ConfigurationsChapter —4
72 CV60 Vehicle-Mount Computer User's Manual
TCP/IP
This section contains Transmission Control Protocol/Internet Protocol
(TCP/IP) network information supported for the CV60. This protocol
readies the CV60 for communications.
By default, the Local Area Connection is set to obtain an IP address and a
DNS server address automatically on your CV60.
Windows CE
The following information pertains to the Windows CE operating system.
To determine what type of Ethernet connection is set up on your CV60,
tap the Ethenet icon twice in your System Tray to access the following inĆ
formation. Tap Renew to refresh this information.
Do the following to assign static IP and DNS addresses:
1 From the CV60 desktop, tap Start > Settings > Network and DialĆup
Connections.
2 DoubleĆtap the PCIĆE100CE2 icon to get its settings. Under the IP
Address tab, tap Specify an IP address, then complete the information: