User's Manual

Windows Device Configurations—Chapter 4
69CV60 Vehicle-Mount Computer User's Manual
Windows XP
The following information pertains to the Windows XP and Windows XP
Embedded operating systems.
DoubleĆTap
Use the Mouse control panel applet to adjust the doubleĆtap sensitivity of
your stylus.
1 From the Windows desktop, select Start > Settings > Control Panel,
then doubleĆclick the Mouse desktop icon.
2 From the center DoubleĆclick speed box, drag the Speed bar to slower
or faster, then test the sensitivity between taps on the folder.
3 When satisified with your doubleĆtap sensitivity, click Apply to save
your settings, then click OK to close the Mouse Proprties.
Calibration
When the CV60 is first reimaged to Windows XP or Windows XP EmĆ
bedded or when it is necessary to recalibrate (or realign) the touchscreen,
use the CV60 Pen Alignment Utility. This utility is located in the WinĆ
dows Control Panel.
The CV60 Pen Alignment Utility calibrates the pen for the CV60, alignĆ
ing the Windows cursor and tip of the stylus to the same location on the
screen. When complete, the calibration values are stored permanently.