User's Manual

Windows Device ConfigurationsChapter —4
66 CV60 Vehicle-Mount Computer User's Manual
Picolink Radio
Note: To ensure the Picolink radio is enabled in your CV60, ensure the
COM2 serial port is turned on in the PhoenixBIOS Setup Utility. See
Chapter 3, PhoenixBIOS Setup Utility" for more information.
The Picolink radio is an Intermec product that is factoryĆinstalled into
your unit with a plate that covers the COM2 serial port at the bottom.
Wireless scanning capability is enabled using the Intermec Picolink radio,
compatible with the Intermec 1552 Decoded Cordless Laser wireless scanĆ
ner.
To associate the Picolink radio with your 1552 wireless scanner, scan the
Picolink bar code label located on the right side of your CV60 in the third
indented rib from the top.
Continue to scan the Picolink label on the CV60 until you hear two beeps from the 1552 Scanner.