User's Manual

PhoenixBIOS Setup Utility—Chapter 3
41CV60 Vehicle-Mount Computer User's Manual
Reflash Procedure
Note: See the CV60 Recovery Instruction Guide P/N: 962Ć054Ć073 for
more information.
Windows CE
The following information pertains to the Windows CE operating system.
1 Copy the new BIOS onto a storage card, insert the card into your
CV60, then reboot the unit.
2 From the CV60 desktop, double-click the My Computer desktop icon,
then doubleĆclick the Windows folder.
3 DoubleĆclick the BiosFlash desktop icon to access the Intermec CV60
Flash Utility.
4 Select Backup BIOS and Flash BIOS with new settings, then from
within the BIOS Settings Locations box, click the second Browse to loĆ
cate the new BIOS ROM file. You may also click the first Browse to
dictate the location where to save the backup file.
Click Flash BIOS to initiate the reflash. The system should automatiĆ
cally reboot after finishing. If not, then perform a reboot.
5 Upon reboot, at the DOS prompt, enter the following:
BiosFlash.exe/nogui/f:<newbiosname>.rom/b:<backupfilename>
where newbiosname is the name of your new flash file name and
backupfilename is the name of the backed up file.
Windows XP
This information pertains to the Windows XP and Windows XP EmĆ
bedded operating systems. Do the instructions as written for Windows CE,
except doubleĆclick the CV60Flash desktop icon.