Manualshelf

User's Manual

ManualsBrandsIntermec Technologies ManualsElectronics802MIAG-CV60
41424344454647484950
PhoenixBIOS Setup UtilityChapter —3
36 CV60 Vehicle-Mount Computer User's Manual
Advanced
This configures advanced features within your CV60. Press the up or
down arrow keys < ↑↓ > to move the cursor to the following fields. Press
the left or right arrow keys < ←/→ > to move the cursor to another
menu.
Caution: If you set items in this menu to incorrect values, you could
cause your system to malfunction.
Advanced Chipset Control
Press [Enter] to access the Advanced Chipset Control menu and configure
the video boot type, the enable memory gap, or the frequency ratio. Press
[Esc] to return to the Advanced menu.
Video Boot Type
Press the plus (+) or minus (-) key to select either 512 KB or 1 MB of sysĆ
tem memory to allocate to the onboard video controller. Default is 1 MB.
Enable Memory Gap
Press the plus (+) or minus (-) key to select either Disabled" or ExĆ
tended." If Extended," this turns off the system RAM to free space for use
with an option card. Default is disabled.
Frequency Ratio
Press the plus (+) or minus (-) key to select from fourteen different internal
frequency multiplier values of the CPU. Default is 4x.
I/O Device Configuration
Press [Enter] to access the Advanced Chipset Control menu and configure
peripheral devices, such as serial ports, panel heater circuit and power, or
the Picolink radio. Press [Esc] to return to the Advanced menu.
Serial Ports
Press the plus (+) or minus (-) key to select Disabled," Enabled," Auto,"
or OS Controlled" to configure serial ports A through D.
If Enabled" is selected, press the plus (+) or minus (-) key to set the base
I/O address and the interrupt for the enabled serial port. Default is OS
Controlled.
Note: To enable the touchscreen, select Enabled" for Windows CE sysĆ
tems and OS Controlled" for Windows XP systems.
Panel Heater
Press the plus (+) or minus (-) key to enable or disable the panel heater cirĆ
cuit and power. Default is disabled.
Picolink
Press the plus (+) or minus (-) key to enable or disable support for the PiĆ
colink radio. Default is disabled.