User's Manual

PhoenixBIOS Setup Utility—Chapter 3
35CV60 Vehicle-Mount Computer User's Manual
Memory Cache
Press [Enter] to access the Memory Cache menu and set the state of the
memory cache. Press [Esc] to return to the Main menu.
Memory Cache
Press the plus (+) or minus (-) key to enable or disable the memory cache.
Default is enabled.
Cache System/Video BIOS Areas
Press the plus (+) or minus (-) key to select either Write Protect" or unĆ
cached" to control the caching of the system BIOS area. Default is Write
Protect
Cache Base 0ć512k, 512kć640k, Extended Memory Area
Press the plus (+) or minus (-) key to select Write Back," uncached,"
Write Through," or Write Protect" to control the caching of the 512k or
512k through 640k base memory or extended memory area. Default is
Write Back.
Cache A000ćAFFF, B000ćBFFF
Press the plus (+) or minus (-) key to select Disabled," USWC Caching,"
Write Through," Write Protect," or Write Back" to control the apĆ
propriate cache range. Default is Disabled.
Cache C800ćCBFF through EC00ćEFFF
Press the plus (+) or minus (-) key to select Disabled," Write Through,"
Write Protect," or Write Back" to control the appropriate cache range.
Default is Disabled.
Boot Features
Press [Enter] to access the Boot Features menu and configure the floppy
check, the summary screen, the bootĆtime diagnostic screen, or the QuickĆ
Boot mode. Press [Esc] to return to the Main menu.
Summary Screen
Press the plus (+) or minus (-) key to dictate whether to display system
configuration information on boot. Default is enabled.
BootĆTime Diagnostic Screen
Press the plus (+) or minus (-) key to state whether to display the diagnosĆ
tic screen during the boot up process. Default is disabled.
QuickBoot Mode
Press the plus (+) or minus (-) key to dictate whether the system can skip
certain tests during the boot process, thus shortening the time required to
perform the boot. Default is enabled.