User's Manual

OperationChapter —2
24 CV60 Vehicle-Mount Computer User's Manual
Restart (or, Reboot")
Note: Make sure that a keyboard is attached to the CV60 BEFORE atĆ
tempting to perform a warm restart.
If the system locks up during normal operations, you can reset it by perĆ
forming either a warm" or a cold" restart. Use the warm restart to clear
the system memory to run another program but not perform a self-test.
When a warm restart does not restore operation, perform a cold restart.
Warm Restart
If your operating system is Windows CE, exit the current application, then
do the following to perform a warm restart:
1 Press Ctrl+Alt+Del on the keyboard to restart
2 Load, or reload, the desired software application.
3 Resume normal operation.
4 If your operating system is Windows XP, select Start > Shut Down
from the Windows desktop, then select Restart to perform a restart or
tap Restart on the display.
Cold Restart
Perform a proper system shutdown, then toggle the On/Off switch on the
bottom of the computer to the Off position. Wait one second, then toggle
the switch back to the On position. If the On/Off switch is inaccessible,
then do one of the following: For fixed-mount units, unplug the AC power
supply from the wall outlet for a few seconds. Be sure to plug it back in.
For vehicle-mounted units, interrupt power to the DC/DC power convertĆ
er for a few seconds.