User's Manual Supplement

6
Country of Intended Use License
Yes No Required Restrictions Details
Other non-EU:
Iceland X
Liechtenstein X
Norway X
Slovenia X
Switzerland X
Additional EMI/RFI Compliance
This device meets the Class B limit requirements of CISPR 22.
For ABTM3 (Bluetooth-Compatible Wireless Module by Socket
Communications) Configuration
The Intermec product you purchased transmits and receives data using a 2.4
GHz Frequency Hopping Spread Spectrum system.
Programming and configuration information for the transceivers is also
provided in the host device documentation. Please check the Intermec Web
site for additional documentation at www.intermec.com.
Hereby, Intermec Technologies Corporation declares that this Model 700C-
ABTM3 is in compliance with the essential requirements and other relevant
provisions of R&TTE Directive (1999/5/EC). This product has been assessed to
the following standards:
• ETSI EN 300 328-2 v1.2.1 (2001-12)
• ETSI EN 301 489-17 v1.1.1 (2001-09)
• EN 60950:1992 (incl. Amdt. 1-4, 11)
• SP/DGPT/ATAS 23 (1995-02)
The original Declaration of Conformity is available on the Intermec
Technologies Corporation Web site at www.intermec.com.
This product transmits electromagnetic waves at 2.4 GHz frequency range. It
has been tested and found compliant with U.S. (OET Guide 65) and Canadian
(RSS 102) RF exposure regulations. There are no regulations covering this
product type in the EU at this time.
The transmitter module’s output power is 1 mW. The products using this
module are intended for business and industrial environments. They should
not be used in residential environments and by children.
This product is marked with this logo and uses radio
frequency bands that are not harmonized throughout the
European Community.