User's Manual Supplement

3
For ABTM3 (Bluetooth-Compatible Wireless Module by Socket
Communications) Configuration
This device complies with Part 15 of the FCC rules and with RSS-210 of
Industry Canada.
Cet appareil est conforme à la Partie 15 des règlements du FCC et à la norme
RSS-210 d’Industrie Canada.
Operation Warning: To comply with the FCC’s RF exposure requirements
and minimize health hazards:
• The user shall not touch the antenna of this device when the device
is in use.
Changes or modifications not expressly approved by Intermec could
void the user’s authority to operate this equipment.
This device requires a radio license unless it is used totally inside a
building. (The user must obtain this license.)
Cet appareil exige une license radio à moins d’être entièrement installé
dans un bâtiment. (L’utilisateur doit obtenir cette license.)
Agency Approvals
This device is UL Listed.
For MC45 (Wireless WAN, GSM/GPRS) Configuration
This device complies with Part 24 of the FCC Rules and with RSS-133 of
Industry Canada.
Cet appareil est conforme à la Partie 24 des règlements du FCC et à la norme
RSS-133 d’Industrie Canada.
Antennas must be supplied and installed as recommended by Intermec
Technologies Corporation to ensure compliance to RF exposure
requirements.
The user shall not touch the antenna while the transmitter is in
use. Operation of the terminal while the unit is in the hand
provides the 5 cm (2 in) distance requirement for safe operation
between the antenna and the hand.
Agency Approvals: See user’s guide instructions for handling,
charging, and replacing batteries. Failure to follow those
instructions can result in personal injury, fire, or battery
explosion.
For SB555 (Wireless WAN, CDMA/1x) Configuration
This device complies with Parts 22 and 24 of the FCC Rules and with RSS-1383
of Industry Canada.
Cet appareil est conforme aux Parties 22 et 24 des règlements du FCC et à la
norme RSS-1383 d’Industrie Canada.