User's Manual

Table Of Contents

Control Panel AppletsAppendix —A

326 700 Series Color Mobile Computer User’s Manual

Preamble

Sets the preamble that precedes any data you scan with the 700 Series

Computer. Common preambles include a data location number or an op-

erator number.

Action

Tap th e Preamble parameter, then enter a preamble value to change this

parameter setting.

SNMP OID

1.3.6.1.4.1.1963.15.3.2.1.1.3.1

Syntax

ADdata

where data is acceptable values up to 31 A SCII characters. Embedded null

(<NUL >) characters are not allowed. Default is no characters (disabled).

Note: When you enter the AD command without data, the preamble is

disabled. If you want to use quotation marks or the following combina-

tions of characters as part of the appended data, separate those characters

from the AD command with quotes. If you do not use quotes as described

here, the 700 Series Computer will interpret the characters as another con-

figuration command:

EXAMPLE:

To use the two-character string BV as a preamble, scan this command (as a

Code 39 label) or send this command through the network: $+AD“BV”