User's Manual

Programming—Chapter 7
251700 Series Color Mobile Computer User’s Manual
FTP Server
FTP support is provided through the FTP Server application
FTPDCE.EXE (MS Windows CE Versions) which is provided as part the
base system.
FTPDCE is the Internet File Transfer Protocol (FTP) server process. The
server can be invoked from an application or command line. Besides ser-
vicing FTP client requests the FTP Server also send a “network announce-
ment” to notify prospective clients of server availability.
Synopsis
ftpdce [ options ]
Options
S -Aaddr
Sets the single target address to which to send the network announce-
ment. Default is broadcast.
S -Bbyte
Sets the FTP data block size. Smaller sizes may be useful over slower
links. Default is 65536.
S -Cname
Sets the device name. Used by Intermec management software.
S -Fvalue
Disables the default Intermec account. A value of “0” disables the ac-
count. Default is “1”.
Note: Disabling the default account without providing a working access
control list on the server will result in a device that will not accept any
FTP connections.
S -Hsec
Sets the interval between network announcements in seconds.A value of
“0” turns the network announcement off. Default is 30 seconds.
S -Iip
Sets the preferred 6920 Communications Server (optional).
S -Llog
Sets the state of logging. Default is 0 (disabled).
S -Nsec
Specifies the number of seconds to wait before starting FTP server ser-
vices.
S -Pport
Sets the UDP port on which the network announcement will be sent.
Default port is 52401.
S -Qport
Sets the port on which the FTP Server will listen for connections.
Default port is 21.