User's Manual

Scanner SupportChapter —6
220 700 Series Color Mobile Computer User’s Manual
Modifier CharactersID CharacterSymbology (continued)
PDF 417/
Micro PDF 417
L 0 Reader set to conform with protocol defined in 1994 PDF 417
specifications.
1 Reader set to follow protocol of ENV 12925 for Extended
Channel Interpretation (all data characters 92 doubled).
2 Reader set to follow protocol of ENV 12925 for Basic Channel
I nterpretation (data characters 92 are not doubled).
3 Code 128 emulation: implied FNC1 in first position.
4 Code 128 emulation: implied FNC1 after initial letter or pair of
digits.
5 Code 128 emulation: no implied FNC1.
Plessey P 0 No options specified. Always transmit 0.
Standard 2 of 5
(2-bar start/stop)
R 0 No check character validation.
1 Modulo 7 check character validated and transmitted.
3 Modulo 7 check character validated but not transmitted.
Standard 2 of 5
(3-bar start/stop)
S 0 No options specified. Always transmit 0.
Telepen B0FullASCIImode
1 Double density numeric only mode
2 Double density numeric followed by full ASCII
4 Full ASCII followed by double density numeric
UPC/EAN E Consider UPC/EAN symbols with supplements as two separate sym-
bols. The first symbol is the main data packet, and the second symbol
is the 2 or 5 digit supplement. Transmit these two symbols separately,
each with its own symbology identifier. Provision is made for the op-
tion of transmitting both symbols as a single data packet.
0 Standard data packet in full EAN format (13 digits for EAN-13,
UPC-A, and UPC-E; d oes not include add -on d ata).
1 Two digit add-on data only.
2 Five digit add-on data only.
3 Combined data packet comprising 13 digits from EAN-13,
UPC-A, or UPC-E symbol and 2 or 5 digits from add-on symbol.
4EAN-8datapacket
IMPORTANT
: The “symbology_id” character letter
must
be uppercase for the above definitions.