User's Manual

6 Scanner Support—Chapter
219700 Series Color Mobile Computer User’s Manual
AIM Symbology ID Defaults
Refer to the official AIM documentation on symbology identifiers for full
information on the different processing options supported.
Symbology ID Character Modifier Characters
Codabar F 0 Standard Codabar symbol. No special p rocessing.
1 ABC Codabar (American Blood commission)
concatenate/message append performed.
2 Reader has validated the check character.
4 Reader has stripped the check character before transmission.
Code 11 H 0 Single modulo 11 check character validated and transmitted.
1 Two modulo 11 check characters validated and transmitted.
3 Check characters validated but not transmitted.
Code 39 A 0 No check character validation nor full ASCII processing. All data
transmitted as decoded.
1 Modu lo 43 check character validated and transmitted.
3 Modu lo 43 check character validated but not transmitted.
4 Full ASCII character conversion performed. No check character
validation.
5 Full ASCII character conversion performed. Modulo 43 check
character validated and transmitted.
7 Full ASCII character conversion performed. Modulo 43 check
character validated but not transmitted.
Code 93 G 0 No options specified. Always transmit 0.
Code128 C 0 Standard data packet. No FNC1 in first or second symbol
character position after start character.
1 EAN/UCC-128 data packet. F NC1 in first symbol character
position after start character.
2 FNC1 in second symbol character position after start character.
4 Concatenation according to International Society for Blood
Transfusion specifications was performed. Concatenated data
follows.
Interleaved 2 of 5 I 0 No check character validation.
1 Modu lo 10 symbol check character validated and transmitted
3 Modu lo 10 symbol check character validated but not transmitted.
Matrix 2 of 5 X0`F
For symbologies or symbology options not listed, a code character
with the value 0-F may be assigned by the decoder manufacturer
to identify those symbologies and options implemented in the
reader.
MSI M 0 Modulo 10 symbol check character validated and transmitted.
1 Modu lo 10 symbol check character validated but not transmitted.