User's Manual

Scanner SupportChapter —6
204 700 Series Color Mobile Computer User’s Manual
IS9CConfig2 Functions
This interface is derived from the IS9CConfig interface and provides addi-
tional methods that can be used to set and retrieve the 700 Series Comput-
er’ s bar code configuration. All supported symbologies are initialized to
their defaults when the S9C firmware is loaded.
GET/SET functions use enumerations as their parameters. In most enu-
merations, there is an enumerator xx_NO_CHANGE (such as
ITC_CODE39_NO_CHANGE), where xx refers to a particular enum-
eration. This enumerator can be used during a call to a SET to indicate
that no change is to be made to that particular parameter. This prevents
the called function from having to format the same S9C command and
send it down to the scanner.
To specify a bar code length of “any length,” use a value of “0” for the bar
code length argument.
IS9CConfig2 functions are the following. IS9CCONFIG.H is the header
file and ITCUUID.LIB contains the IID_IADC Interface GUID value
used to obtain the interface.
S IS9CConfig2::GetCode11 (page 205)
S IS9CConfig2::SetCode11 (page 205)
S IS9CConfig2::GetCustomSymIds (page 207)
S IS9CConfig2::SetCustomSymIds (page 208)
S IS9CConfig2::GetGlobalAmble (page 211)
S IS9CConfig2::SetGlobalAmble (page 212)
S IS9CConfig2::GetPDF417Ext (page 213)
S IS9CConfig2::SetPDF417Ext (page 213)
S IS9CConfig2::GetSymIdXmit (page 214)
S IS9CConfig2::SetSymIdXmit (page 214)