User's Manual

6 Scanner Support—Chapter
201700 Series Color Mobile Computer User’s Manual
UPC/EAN Default Settings
Parameter Default Valid Range
Decoding ITC_UPCEAN_NO_CHANGE This parameter is no longer used, set it to this value.
UPC-A Active ITC_UPCA_SELECT
UPC-E Active ITC_UPCE_SELECT
EAN-8 Active ITC_EAN8_SELECT
EAN-13 Active ITC_EAN13_SELECT
Add On Digits Not Required ITC_UPCEAN_ADDON_DIGITS
Add On 2 Digits Not Active ITC_UPCEAN_ADDON_TWO
Add On 5 Digits Not Active ITC_UPCEAN_ADDON_FIVE
UPC-A Check Digit Transmitted ITC_UPCA_CHECK_DIGIT
UPC-E Check Digit Transmitted ITC_UPCE_CHECK_DIGIT
EAN-8 Check Digit Transmitted ITC_EAN8_CHECK_DIGIT
EAN-13 Check Digit Transmitted ITC_EAN13_CHECK_DIGIT
UPC-A Number System Transmitted ITC_UPCA_NUMBER_SYSTEM
UPC-E Number System Transmitted ITC_UPCE_NUMBER_SYSTEM
Reencode UPC-A UPC -A transmitted as EAN-13 ITC_UPCA_REENCODE
Reencode UPC-E UPC-E transmitted as UPC-E ITC_UPCE_REENCODE
Reencode EAN-8 EAN-8 transmitted as EAN-8 ITC_EAN8_REENCODE
UPC/EAN Enumerations
typedef enum tagUpcEanDecoding
{
ITC_UPCEAN_NOTACTIVE = 0,
ITC_UPCEAN_ACTIVE = 1, // Default
ITC_UPCEAN_NO_CHANGE = 255
} ITC_UPCEAN_DECODING;
typedef enum tagUpcASelect
{
ITC_UPCA_DEACTIVATE,
ITC_UPCA_ACTIVATE, // Default
ITC_UPCA_NO_CHANGE = 255
} ITC_UPCA_SELECT;
typedef enum tagUpcESelect
{
ITC_UPCE_DEACTIVATE,
ITC_UPCE_ACTIVATE, // Default
ITC_UPCE_NO_CHANGE = 255
} ITC_UPCE_SELECT;
typedef enum tagEan8Select
{
ITC_EAN8_DEACTIVATE,
ITC_EAN8_ACTIVATE, // Default
ITC_EAN8_NO_CHANGE = 255
} ITC_EAN8_SELECT;
typedef enum tagEan13Select
{
ITC_EAN13_DEACTIVATE,