User's Manual

Scanner SupportChapter —6
172 700 Series Color Mobile Computer User’s Manual
IS9CConfig Functions
This interface provides methods to set and retrieve the 700 Series Com-
puter bar code configuration. All supported symbologies are initialized to
their defaults when the S9C firmware is loaded.
GET/SET functions use enumerations as their parameters. In most enu-
merations, there is an enumerator xx_NO_CHANGE (such as
ITC_CODE39_NO_CHANGE), where xx refers to a particular enum-
eration. This enumerator can be used during a call to a SET to indicate
that no change is to be made to that particular parameter. This prevents
the called function from having to format the same S9C command and
send down to the S9C scanner.
For all symbologies, to set a bar code length of “any length,” use a value of
“0” for the bar code length argument.
IS9CConfig functions are the following. IS9CCONFIG.H is the header
file and ITCUUID.LIB contains the IID_IADC Interface GUID value
used to obtain the interface.
S IS9CConfig::GetCodabar (page 173)
S IS9CConfig::SetCodabar (page 174)
S IS9CConfig::GetCode39 (page 176)
S IS9CConfig::SetCode39 (page 177)
S IS9CConfig::GetCode93 (page 179)
S IS9CConfig::SetCode93 (page 179)
S IS9CConfig::GetCode128 (page 180)
S IS9CConfig::SetCode128 (page 181)
S IS9CConfig::GetI2of5 (page 183)
S IS9CConfig::SetI2of5 (page 184)
S IS9CConfig::GetMatrix2of5 (page 185)
S IS9CConfig::SetMatrix2of5 (page 186)
S IS9CConfig::GetMSI (page 187)
S IS9CConfig::SetMSI (page 187)
S IS9CConfig::GetPDF417 (page 188)
S IS9CConfig::SetPDF417 (page 189)
S IS9CConfig::GetPlessey (page 192)
S IS9CConfig::SetPlessey (page 192)
S IS9CConfig::GetStandard2of5 (page 194)
S IS9CConfig::SetStandard2of5 (page 195)
S IS9CConfig::GetTelepen (page 197)
S IS9CConfig::SetTelepen (page 197)
S IS9CConfig::GetUpcEan (page 198)
S IS9CConfig::SetUpcEan (page 200)