User's Manual

Network SupportChapter —4
108 700 Series Color Mobile Computer User’s Manual
S Encryption:
This indicates whether WEP encryption is “Enabled” or “Disabled
(Open).” See page 90 for more information.
S Link:
This indicates the speed at which a connection is made.
S TX Power:
This shows the speed (in milliwatts) at which transmissions are made.
S Signal:
This identifies the radio signal strength (in dBm).
S Antenna:
This identifies the antenna being used with the assigned profile.
S AP Mac:
This identifies the MAC address of the access point to which this 700
Series Computer is connected.
S IP:
This provides the IP address which can be set as either DHCP (Dynam-
ic Host Configuration Protocol) or statically.
S Power:
This indicates the power status of this 700 Series Computer: “Always
On” is the default.
S History:
This bar graph displays an active history of this radio module’ s quality
of connections.
S Friendly Indicator:
If the radio stack is loaded, then all three dots are filled. These dots are
left empty if the stack is not loaded. These dots do vary based on the
CORE application’ s perception of the overall connection quality.