Quick Start Guide

700 Series Color Mobile Computer Quick Start Guide
7
For example, pressing the Alpha key
and the ‘1’
key allows the next letter
to be capitalized. Again it stays in this
mode until you press the Alpha key again.
Another example of how this works, if you
want to type a ‘c’ press the
key and
the ‘2’
key three times. If you need a
letter that is on the same key as the last
letter entered, wait two seconds after you
pressed the last key then you can enter
the correct series of keystrokes to create
the next letter.
Ambient Light Sensor
Ambient light sensor turns on the display
lighting when conditions warrant but au-
tomatically turn if off again as surround-
ing light increases. This conserves your
700 Color’s battery power. This is a fea-
ture which can be set by you through the
“Settings” options, accessed from the Start
Menu (Settings>Backlight>Both Power).
Scanning/Keypad Shift and
Notification (checkmark icon) Light
The Scanning/Keypad Shift and Noti-
fication status light (LED)
turns
red, green, or yellow.
"
Green, indicates a ’Good Scan’ and
while the scanner is initializing.
"
Red, keypad is shifted to the AL-
PHA (Blue) plane and the 700 Color
is On.
"
Blinking Red, radio is powered up
when 700 Color is in suspend mode.