Quick Start Guide

700 Series Color Mobile Computer Quick Start Guide
23
T roubleshooting
700 Color does not respond to apply-
ing power.
Check to ensure that your mobile comput-
er is plugged in and that it is making good
contact.
700 Color will not turn on when the
I/O
key is pressed.
The battery may be low and need recharg-
ing.
The Power Status Light (LED) starts
blinking.
The Power Status LED informs you of the
status of your battery pack when it is con-
nected to a charging device. The Power
Status LED reads:
"
Off when it is in a normal operating
mode or when no external power is
supplied.
"
Blinking red when the battery is
low.
"
Continuous red when it is charg-
ing.
"
Continuous green when it is done
charging.
"
Yellow occurs when there is not a
battery pack in your 700 Color or it’ s
out of charging range 32 to 122°F(0
to 50°C).
700 Color won’t power up, screen is
blank.
1. Battery may be critically low.
2. Ensure that your computer has
been on a charger for at least five
minutes, then remove from the dock
and perform the reset procedure.
The display will then be active.