User's Manual

Chapter 4 — Network Support
CN30 Mobile Computer User’s Manual 71
Enter.
If you choose TLS:
a Load a user and root certificate on your CN30. For help,
see “Loading a Certificate” on page 64 for help.
b For Validate Server Certificate, choose Enabled and press Enter.
c You must enter a User Name and Subject Name. You can
also enter a Server Common Name if you want to increase
your level of security.
8 Exit the Configuration Utility.
Configuring 802.1X Security With Microsoft Security
Use this procedure to configure 802.1x security on your CN30 with
Microsoft security.
To enable 802.1x security on your CN30
1 Make sure you have configured the communications and radio param-
eters on your CN30.
2 Press C and then B to open the System Main Menu.
3 Choose Configuration Utility > Communications > 802.11 Radio >
Security Settings.
4 For Network Authentication, choose Open.
5 For Data Encryption, choose WEP.
6 For 802.1X Authentication, choose TLS or PEAP.
If you choose TLS:
a Select Properties and choose the Select button.
b Select your certificate from the list and press Enter twice.
c Press Esc until you return to the Communications menu and “Apply
Network Settings” appears on the screen. The User Logon dialog box
appears.
d In the User Logon dialog box, enter the User Name and Domain and
press Enter.
If you choose PEAP:
Once the radio starts to authenticate, the Network Password
dialog box appears.
a Enter a User Name, Password, and Domain.
b Press Enter. You return to the Communications menu.
7 For Network Key Setting, choose Automatic.