User's Manual

Chapter 4 — Network Support
CN30 Mobile Computer User’s Manual 69
3 Choose Configuration Utility > Communications > 802.11 Radio >
Security Settings.
4 For Network Authentication, choose WPA and press Enter.
5 For 802.1x Authentication, choose either TLS or PEAP.
If you choose TLS:
a Select Properties. The Auth. Settings dialog box appears.
b Choose the Select button.
c Select your certificate from the list and press Enter.
If you choose PEAP:
a Select Properties. The Auth. Settings dialog box appears.
b Make sure the Validate Server check box is selected.
c Press Enter. Once the radio starts to authenticate, the Network Pass-
word dialog box appears.
d Enter the User Name, Password, and select the Save password check
box.
e (Optional) In the Domain field, enter the Active Directory domain
associated with the user account.
f Press Enter. You return to the Communications menu.
6 Exit the Configuration Utility.
To enable WPA-PSK security on your CN30
1 Make sure you have configured the communications and radio param-
eters on your CN30.
2 Press C and then B to open the System Main Menu.
3 Choose Configuration Utility > Communications > 802.11
Radio > Security Settings.
4 For Network Authentication, choose WPA-PSK.
5 For Network Key Value, enter a pass phrase or pre-shared key.
The pass phrase must be a value between 8 to 63 ASCII characters. The
pre-shared key must be a value of 32 Hex pairs. The pre-shared key must
be preceded by 0x. The value must match the key value on the access
point.
6 Exit the Configuration Utility.