User's Manual
Table Of Contents
- Before You Begin
- Safety Icons
- Global Services and Support
- Chapter 1 Using the CN30 Mobile Computer
- Audio
- Using the Battery
- Charging and Installing the Battery
- Beeper
- Select a Beeper Volume
- Using the Keypad
- Using the Power (I) Key
- Using the Screen
- Resetting Your CN30 Mobile Computer
- Software Build Version
- Chapter 2 Windows Mobile Version 5.0
- To Check the Intermec Build
- Where to Find Information
- Getting Started
- Programs
- Entering Information
- Selecting the Writing
- Converting Writing to Text
- Customizing Your CN30 Mobile Computer
- Adding Programs Using ActiveSync
- Microsoft ActiveSync
- Adding a Program to the Start Menu
- Microsoft Pocket Outlook
- Tasks: Keeping a To Do List
- Notes: Capturing Thoughts and Ideas
- Chapter 3 Installing Applications
- Installing Applications
- Using Microsoft ActiveSync
- Using a Storage Card
- Migrating from Another Computer
- Chapter 4 Network Support
- Configuring the CN30 With the setup Assistant
- Configuring 802.1X Radio Communications
- Configuring the Network Parameters for a TCP/IP Network
- Configuring Security
- Configuring 802.1X Security
- Loading Certificates
- Configuring a VPN
- SNMP Configuration on the CN30 Mobile Computer
- Chapter 7 Programming
- Creating CAB Files
- Creating CAB Files with the CAB Wizard
- Customization and Lockdown
- Networking APIs
- Basic Connect/Disconnect Functions
- Appendix A Specifications
- Physical and Environmental Specifications
- Hardware
- Power Specifications
- Accessories
Chapter 4 — Network Support
68 CN30 Mobile Computer User’s Manual
a Select Password prompt, choose Enter password now, and then press
Enter.
Note: You can use Prompt for password to troubleshoot your connection
to the network if you have problems.
b Select User Password, type a user password, and then press Enter.
c Select User name, type your user name, and then press Enter.
d For Validate Server Certificate, choose Enabled and press Enter.
Note: You must have the date on the CN30 set correctly when you enable
Validate Server Certificate..
If you choose TLS:
a Load a user and root certificate on your CN30. For help, see “Loading
Certificates” on page 64 for help.
b For Validate Server Certificate, choose Enabled and press Enter.
c You must enter a User Name and Subject Name. You can also enter a
Server Common Name if you want to increase your level of security.
7 Exit the Configuration Utility.
To enable WPA-PSK security on your CN30 with Funk security
1 Make sure you have configured the communications and radio param-
eters on your CN30.
2 Make sure you have selected Funk as your security choice.
3 Press C and then B to open the System Main Menu.
4 Choose Configuration Utility > Communications > 802.11 Radio >
Profile Settings.
5 For Association, choose WPA and press Enter. Encryption automati-
cally changes to TKIP.
6 For Authentication, choose None and press Enter.
7 For Pre-Shared Key, enter the pre-shared key or the pass phrase. The
pre-shared key must be a value of 32 Hex pairs. The preshared key must
be preceded by 0x. The value must match the key value on the access
point. The pass phrase must be between 8 and 63 characters.
8 Exit the Configuration Utility.
Configuring WPA Security With Microsoft Security
Use these procedures to set WPA and WPA-PSK security on your CN30
with Microsoft security.
To enable WPA security on your CN30 with Microsoft security
1 Make sure you have configured the communications and radio param-
eters on your CN30.
2 Press C and then B to open the System Main Menu.