User's Manual

Chapter 4 — Network Support
66 CN30 Mobile Computer User’s Manual
Funk security provides everything you receive with Microsoft security plus
CCX v1.0 compliance. Funk security enables you to use LEAP and TTLS
authentication on your CN30.
The type of security you can choose is not dependent on your authentica-
tion server. To use Funk security, you need to:
•
Select Funk security as your security choice
• Select a profile
Selecting Funk as Your Security Choice
The default security choice is Microsoft. If you want to use Funk security,
you need to select it as your security choice.
To select Funk security as your security choice
1 Press C and then B. The System Main Menu appears.
2 Select the Configuration Utility.
3 Select Communications > 802.11 Radio > Funk Security.
4 From the Security Choice dialog box, choose Funk Security. An
alert box appears asking if you want to warm boot now.
5 Press Enter. Your CN30 warm boots.
Selecting a Profile
You can define up to four profiles for your Funk security. Different profiles
let your CN30 communicate in different networks without having to
change all of your security settings. For example, you might want to set up
one profile for the manufacturing floor and one for the warehouse.
To select a profile
1 Press C and then B. The System Main Menu appears.
2 Select the Configuration Utility.
3 Select Communications > 802.11 Radio > Select Profile.
4 Select Active Profile and choose the profile you want to
name.
5 (Optional) Select Change Profile Label to give the active
profile a meaningful name.
6 Repeat Steps 4 and 5 for as many profiles as you want to
define.
7 Select the profile you want to configure with security settings.
8 Press Esc to return to the 802.11 Radio menu.
9 Configure your security settings.e