User's Manual
Table Of Contents
- Before You Begin
- Safety Icons
- Global Services and Support
- Chapter 1 Using the CN30 Mobile Computer
- Audio
- Using the Battery
- Charging and Installing the Battery
- Beeper
- Select a Beeper Volume
- Using the Keypad
- Using the Power (I) Key
- Using the Screen
- Resetting Your CN30 Mobile Computer
- Software Build Version
- Chapter 2 Windows Mobile Version 5.0
- To Check the Intermec Build
- Where to Find Information
- Getting Started
- Programs
- Entering Information
- Selecting the Writing
- Converting Writing to Text
- Customizing Your CN30 Mobile Computer
- Adding Programs Using ActiveSync
- Microsoft ActiveSync
- Adding a Program to the Start Menu
- Microsoft Pocket Outlook
- Tasks: Keeping a To Do List
- Notes: Capturing Thoughts and Ideas
- Chapter 3 Installing Applications
- Installing Applications
- Using Microsoft ActiveSync
- Using a Storage Card
- Migrating from Another Computer
- Chapter 4 Network Support
- Configuring the CN30 With the setup Assistant
- Configuring 802.1X Radio Communications
- Configuring the Network Parameters for a TCP/IP Network
- Configuring Security
- Configuring 802.1X Security
- Loading Certificates
- Configuring a VPN
- SNMP Configuration on the CN30 Mobile Computer
- Chapter 7 Programming
- Creating CAB Files
- Creating CAB Files with the CAB Wizard
- Customization and Lockdown
- Networking APIs
- Basic Connect/Disconnect Functions
- Appendix A Specifications
- Physical and Environmental Specifications
- Hardware
- Power Specifications
- Accessories
Chapter 2 — Windows Mobile Version 5.0
CN30 Mobile Computer User’s Manual 13
• For better recognition, try increasing the zoom level to 300% by using
the Tools menu. Recognition does not work well below a 150% zoom
level.
• Write the letters of a word closely and leave big gaps between words so
that the CN30 Mobile Computer can easily tell where words begin and
end.
• Hyphenated words, foreign words that use special characters such as
accents, and some punctuation cannot be converted.
• If you add writing to a word to change it (such as changing a “3” to an
“8”) after you attempt to recognize the word, the writing you add is not
included if you attempt to recognize the writing again.
Drawing on the Screen
You can draw on the screen in the same way that you write on the
screen. The difference between writing and drawing on the screen is
how you select items and how they are edited. For example, you can
resize selected drawings, while you cannot resize writing.
Creating a Drawing
• S Cross three ruled lines on your firststroke. A drawing box appears. Sub-
sequent strokes in or touching the drawing box become part of the draw-
ing. Drawings that do notcross three ruled lines are treated as writing.
The drawing box indicates the boundaries of the drawing.
Pen button.
Note: You may want to change the zoom levelso that you can more easily
work on or view your drawing. Tap Tools and then a zoom level.
Selecting a Drawing
If you want to edit or format a drawing, you must select it first.
Tap and hold the stylus on the drawinguntil the selection handle appears.
To select multiple drawings, deselect the Pen button and then drag to select
the drawings you want.
You can cut, copy, and paste selected drawings by tapping and holding the
selected drawingand then tapping an editing command on the pop-up
menu, or by tapping the command on the Edit menu. To resize a drawing,
make sure the Pen button is not selected, and drag a selection handle.
Recording a Message
In any program where you can write or draw on the screen, you can
also quickly capture thoughts, reminders, and phone numbers by
recording a message.