User's Manual
Table Of Contents
- Before You Begin
- Safety Icons
- Global Services and Support
- Chapter 1 Using the CN30 Mobile Computer
- Audio
- Using the Battery
- Charging and Installing the Battery
- Beeper
- Select a Beeper Volume
- Using the Keypad
- Using the Power (I) Key
- Using the Screen
- Resetting Your CN30 Mobile Computer
- Software Build Version
- Chapter 2 Windows Mobile Version 5.0
- To Check the Intermec Build
- Where to Find Information
- Getting Started
- Programs
- Entering Information
- Selecting the Writing
- Converting Writing to Text
- Customizing Your CN30 Mobile Computer
- Adding Programs Using ActiveSync
- Microsoft ActiveSync
- Adding a Program to the Start Menu
- Microsoft Pocket Outlook
- Tasks: Keeping a To Do List
- Notes: Capturing Thoughts and Ideas
- Chapter 3 Installing Applications
- Installing Applications
- Using Microsoft ActiveSync
- Using a Storage Card
- Migrating from Another Computer
- Chapter 4 Network Support
- Configuring the CN30 With the setup Assistant
- Configuring 802.1X Radio Communications
- Configuring the Network Parameters for a TCP/IP Network
- Configuring Security
- Configuring 802.1X Security
- Loading Certificates
- Configuring a VPN
- SNMP Configuration on the CN30 Mobile Computer
- Chapter 7 Programming
- Creating CAB Files
- Creating CAB Files with the CAB Wizard
- Customization and Lockdown
- Networking APIs
- Basic Connect/Disconnect Functions
- Appendix A Specifications
- Physical and Environmental Specifications
- Hardware
- Power Specifications
- Accessories
Chapter 2 — Windows Mobile Version 5. 0
4 CN30 Mobile Computer User’s Manual
Programs
You can switch from one program to another by selecting it from the Start
menu. (You can customize which programs you see on this menu. For
information, see "Adjusting Settings" on page 41.) To access some pro-
grams, tap Start > Programs, and then the program name.
You can also switch to some programs by pressing a program button. Your
CN30 Mobile Computer has one or more program buttons located on the
front or side of the computer. The icons on the buttons identify the pro
grams to which they switch.
Note: Some programs have abbreviated labels for check boxes and drop-
down menus. To see the full spelling of an abbreviated label, tap and hold
the stylus on the label. Drag the stylus off the label so that the command is
not carried out.
The following is a partial list of programs that are on your CN30 Mobile
Computer. Look on the Windows Mobile Companion CD for additional
programs that you can install onto your CN30 Mobile Computer.
Synchronize information between your CN30 Mobile Computer and desk-
top.
Keep track of your appointments and create meeting requests.
Keep track of your friends and colleagues.
Send and receive e-mail messages.
Browse Web and WAP (Wireless Application Protocol) sites, and download
new programs and files from the Internet.
Create handwritten or typed notes, drawings, and recordings.
Keep track of your tasks.
Play digital audio and video files that are stored on your CN30 Mobile
Computer or on a network.
Navigation Bar and Command Bar
The navigation bar is located at the top of the screen. It displays the active
program and current time, and allows you to switch to programs and close
screens.Tap to switch to a program.Tap to see more programs.Tap to switch
to a program that you recently used.Tap to change device settings.Tap to see
a Help topic for the current screen.Use the command bar at the bottom of
the screen to perform tasks in programs. The command bar includes menu
names, buttons, and the Input Panel button. To create a new item in the
current program, tap New. To see the name of a button, tap and hold the
stylus on the button. Drag the stylus off the button so that the command is
not carried out.Tap to display the input panel. Tap to select Tap to select
button commands.menu commands.7