User's Manual
Table Of Contents
- Before You Begin
- Safety Icons
- Global Services and Support
- Chapter 1 Using the CN30 Mobile Computer
- Audio
- Using the Battery
- Charging and Installing the Battery
- Beeper
- Select a Beeper Volume
- Using the Keypad
- Using the Power (I) Key
- Using the Screen
- Resetting Your CN30 Mobile Computer
- Software Build Version
- Chapter 2 Windows Mobile Version 5.0
- To Check the Intermec Build
- Where to Find Information
- Getting Started
- Programs
- Entering Information
- Selecting the Writing
- Converting Writing to Text
- Customizing Your CN30 Mobile Computer
- Adding Programs Using ActiveSync
- Microsoft ActiveSync
- Adding a Program to the Start Menu
- Microsoft Pocket Outlook
- Tasks: Keeping a To Do List
- Notes: Capturing Thoughts and Ideas
- Chapter 3 Installing Applications
- Installing Applications
- Using Microsoft ActiveSync
- Using a Storage Card
- Migrating from Another Computer
- Chapter 4 Network Support
- Configuring the CN30 With the setup Assistant
- Configuring 802.1X Radio Communications
- Configuring the Network Parameters for a TCP/IP Network
- Configuring Security
- Configuring 802.1X Security
- Loading Certificates
- Configuring a VPN
- SNMP Configuration on the CN30 Mobile Computer
- Chapter 7 Programming
- Creating CAB Files
- Creating CAB Files with the CAB Wizard
- Customization and Lockdown
- Networking APIs
- Basic Connect/Disconnect Functions
- Appendix A Specifications
- Physical and Environmental Specifications
- Hardware
- Power Specifications
- Accessories
Chapter 1 — Using the CN30 Mobile Computer
10 CN30 Mobile Computer User’s Manual
Magnifier Application
The Magnifier application allows you to view an enlarged portion of the
CN30 Computer screen by tapping and holding the stylus. The enlarged
window can be moved to any location on the screen.
To Start Magnifier
1 On the 14-key or 56-key keypad, press the orange key. Press the Magni-
fier key.
2 Tap and hold the stylus to move the displayed area of the screen. For
more help see the Magnifier help under Windows help.
Using the Power (I) Key
When you press the (I) key to turn off the CN30, you actually put the
CN30 in Suspend mode. In Suspend mode, the CN30 continues to supply
power to all memory, but turns off power to most hardware. This power-
saving feature is designed to prolong battery life.
When you press the (I) key to turn the CN30 back on, your computer
resumes where it was when you turned it off.
If you are using WPA or 802.1x security, the computer may need to reau-
thenticate before it starts your application.
If the Battery light flashes and your CN30 does not resume after pressing
(I), your battery may be too low to supply power. Replace the battery. If
replacing the battery does not solve the problem, see “Booting the CN30”
on page 122.
Note: The Magnifier window is only a display window.