User's Manual
Table Of Contents
- Before You Begin
- Safety Icons
- Global Services and Support
- Chapter 1 Using the CN30 Mobile Computer
- Audio
- Using the Battery
- Charging and Installing the Battery
- Beeper
- Select a Beeper Volume
- Using the Keypad
- Using the Power (I) Key
- Using the Screen
- Resetting Your CN30 Mobile Computer
- Software Build Version
- Chapter 2 Windows Mobile Version 5.0
- To Check the Intermec Build
- Where to Find Information
- Getting Started
- Programs
- Entering Information
- Selecting the Writing
- Converting Writing to Text
- Customizing Your CN30 Mobile Computer
- Adding Programs Using ActiveSync
- Microsoft ActiveSync
- Adding a Program to the Start Menu
- Microsoft Pocket Outlook
- Tasks: Keeping a To Do List
- Notes: Capturing Thoughts and Ideas
- Chapter 3 Installing Applications
- Installing Applications
- Using Microsoft ActiveSync
- Using a Storage Card
- Migrating from Another Computer
- Chapter 4 Network Support
- Configuring the CN30 With the setup Assistant
- Configuring 802.1X Radio Communications
- Configuring the Network Parameters for a TCP/IP Network
- Configuring Security
- Configuring 802.1X Security
- Loading Certificates
- Configuring a VPN
- SNMP Configuration on the CN30 Mobile Computer
- Chapter 7 Programming
- Creating CAB Files
- Creating CAB Files with the CAB Wizard
- Customization and Lockdown
- Networking APIs
- Basic Connect/Disconnect Functions
- Appendix A Specifications
- Physical and Environmental Specifications
- Hardware
- Power Specifications
- Accessories
Chapter 1 — Using the CN30 Mobile Computer
4 CN30 Mobile Computer User’s Manual
Using the Battery
The CN30 uses a lithium-ion battery as its main power source. You must
fully charge the main battery before you can use the CN30. When you
change the battery, a backup battery (super capacitor) maintains your mem-
ory, data and real-time clock for at least 10 minutes.
The 14-key keypad module has a 3.7V 2400 MAh battery that is internal
to the module and is not user replaceable.
The 56-keypad module has a removable 3.7V 4800 MAh replaceable Lith-
ium-Ion (LiIon) battery.
Attention: L’enlèvement de la batterie principale quand le bas de secours
de batterie ou les affichages en critique bas d’icône dans la barre de statut
peut causer votre CN30 à la botte froide et de vous peut perdre des don-
nées.
Avertissement: Le paquet de piles d’ions de lithium qui est utilisé dans cet
appareil peut presenter un risque feu ou un risque chimique de brûlure s’il
est maltraité. Il ne faut pas le désassembler, le réchauffer à une tempéra-
ture plus élevée que 100°C (212°F) ou l’incinérer.
Dispose of used battery packs promptly. Keep away from children. Contact
your local Intermec sales representative for replacement batteries.
Several factors determine the life of your battery such as extreme tempera-
tures, input devices, and your usage.
Removing the main battery when the backup battery low or critically low
icon displays in the status bar may cause your CN30 to cold boot and you
may lose data.
The lithium-ion battery pack that is used in this device may present a fire or
chemical burn hazard if it is mistreated. Do not disassemble it, heat it above
100°C (212°F) or incinerate it.
Attention: Si la batterie n’est pas remplacée immédiatement, des données ou
applications importantes risquent d’être perdues