User's Manual
Table Of Contents
- Before You Begin
- About the Computer Features
- About the User Interface and Intermec Applications
- Use the Phone
- Use the Camera
- Use GPS
- Configure the Computer
- How to Configure the Computer
- About Intermec Settings on the Computer
- Configure the Computer Remotely with SmartSystems
- About Network Communications
- About Wireless Security
- Load a Certificate
- How to Make Your Security Choice
- Select a Funk Security Profile
- Configure WPA or WPA2 Enterprise (802.1x) Security with Funk Security
- Configure WPA or WPA2 Personal (PSK) Security with Funk Security
- Configure 802.1x Security with Funk Security
- Configure LEAP Security with Funk Security
- Configure Static WEP Security with Funk Security
- Use Open (No Security) Associations with Funk Security
- Select Microsoft as Your Security Choice
- Configure WPA or WPA2 Enterprise (802.1x) Security with Microsoft Security
- Configure WPA or WPA2 Personal (PSK) Security with Microsoft Security
- Configure 802.1x Security with Microsoft Security
- Configure Static WEP Security with Microsoft Security
- Use Open (No Security) Associations with Microsoft Security
- Manage the Computer
- Troubleshoot and Maintain the Computer
- Specifications
- Keypads and Keystrokes
Chapter 6 — Configure the Computer
80 Document Title
How to Navigate in Intermec Settings
You can easily navigate through the screens in Intermec Settings to
find the parameters you need to configure:
• Tap inside a text field to be able to enter text into it.
• Tap a field once to select it.
• If you see a ... next to a menu item, there is only one more screen
available. Tap the menu item to access this screen.
• If you see a > next to a menu item, there are more screens available
in the next level. Tap the menu item to access these screens.
• Use the up and down arrow keys to move up and down the menu.
• To move back a level in the menu, tap Back or Cancel on the Tile
bar.
• To exit Intermec Settings, tap Menu > Exit or OK.
Enable Intermec Settings Password
You can protect Intermec Settings from other users by enabling a
password.
1 Start Intermec Settings.
Virtual Wedge Method Virtual Wedge Method (Adapt to
application, character mode, or block
mode)
Barcode Scanner Wedge
• Barcode Scanner Grid
• Label Encoding (Code Page)
Magstripe Reader Wedge Magstripe Reader Grid
Location Services Menu
Location Services Options Parameters You Can Configure
Server
• Port
• Enable Server
Virtual GPS Virtual GPS Settings
Virtual Wedge Menu (Continued)
Virtual Wedge Options Parameters You Can Configure
DRAFT