User's Manual
Table Of Contents
- Before You Begin
- About the Computer Features
- About the User Interface and Intermec Applications
- Use the Phone
- Use the Camera
- Use GPS
- Configure the Computer
- How to Configure the Computer
- About Intermec Settings on the Computer
- Configure the Computer Remotely with SmartSystems
- About Network Communications
- About Wireless Security
- Load a Certificate
- How to Make Your Security Choice
- Select a Funk Security Profile
- Configure WPA or WPA2 Enterprise (802.1x) Security with Funk Security
- Configure WPA or WPA2 Personal (PSK) Security with Funk Security
- Configure 802.1x Security with Funk Security
- Configure LEAP Security with Funk Security
- Configure Static WEP Security with Funk Security
- Use Open (No Security) Associations with Funk Security
- Select Microsoft as Your Security Choice
- Configure WPA or WPA2 Enterprise (802.1x) Security with Microsoft Security
- Configure WPA or WPA2 Personal (PSK) Security with Microsoft Security
- Configure 802.1x Security with Microsoft Security
- Configure Static WEP Security with Microsoft Security
- Use Open (No Security) Associations with Microsoft Security
- Manage the Computer
- Troubleshoot and Maintain the Computer
- Specifications
- Keypads and Keystrokes
Chapter 4 — Use the Camera
Document Title 67
frame turns white and a red target appears. The camera tries to
focus on the center of the document.
<ILLUSTRATION?>
When the focus and distance are correct, the target turns white and
the document image is captured.
5 To view the document capture image, you can browse to
MyDocuments\MDI and tap the image file to view it.
Camera Settings for Document Imaging
To use the camera for document imaging, you must use the Intermec
Settings application to configure the camera. From the main screen of
Intermec Settings, select Data Collection > Camera > Camera
Settings > Document Imaging.
Settings Description Choices
Enable
document
imaging
Enables or disables document
imaging.
• Disab le
• Enable without
decode
Focus check Sets the acceptable focus level for
document imaging.
• Disable (no focus
check)
• Medium level
• High level
Image/area to
capture ratio
Default is 30.
Output
compression
Sets the image compression level.
• Bitmap
• JPEG
• TIFFG4
Output
compression
quality
Sets the output compression
quality level.
Default is 60.
Perspective
correction
Corrects the document image for
perspective.
Enable (default) or
disable.
Color
conversion
• None (default)
• Monochrome
• Enhanced
monochrome (TIFF)
DRAFT