User's Manual
Table Of Contents
- Before You Begin
- About the Computer Features
- About the User Interface and Intermec Applications
- Use the Phone
- Use the Camera
- Use GPS
- Configure the Computer
- How to Configure the Computer
- About Intermec Settings on the Computer
- Configure the Computer Remotely with SmartSystems
- About Network Communications
- About Wireless Security
- Load a Certificate
- How to Make Your Security Choice
- Select a Funk Security Profile
- Configure WPA or WPA2 Enterprise (802.1x) Security with Funk Security
- Configure WPA or WPA2 Personal (PSK) Security with Funk Security
- Configure 802.1x Security with Funk Security
- Configure LEAP Security with Funk Security
- Configure Static WEP Security with Funk Security
- Use Open (No Security) Associations with Funk Security
- Select Microsoft as Your Security Choice
- Configure WPA or WPA2 Enterprise (802.1x) Security with Microsoft Security
- Configure WPA or WPA2 Personal (PSK) Security with Microsoft Security
- Configure 802.1x Security with Microsoft Security
- Configure Static WEP Security with Microsoft Security
- Use Open (No Security) Associations with Microsoft Security
- Manage the Computer
- Troubleshoot and Maintain the Computer
- Specifications
- Keypads and Keystrokes
Chapter 4 — Use the Camera
Document Title 53
Camera Settings (Still)
Setting Description Choices
Mode Determines the camera operating
mode.
• Normal: Takes one
picture.
• Burst: Takes a series of
three pictures.
• Timer: Waits 10
seconds before taking
the picture.
Zoom Sets the amount of digital zoom.
• 1.0x
• 1.5x
• 2.0x
• 2.5x
• 3.0x
• 3.5x
• 4.0x
• 6.0x
• 8.0x
• Manual
Scenes Selects a Scene for the camera.
Scenes are sets of preset values for
the camera, optimized for
different environments.
• Auto
• Manual
• Van Interior
• Office Store
• Warehouse
• Daylight
• Night
• Cloudy
• Check
• DocCap
Settings Brightness
• +100
• +50
• 0
• Manual
DRAFT