User's Manual
Table Of Contents
- Before You Begin
- About the Computer Features
- About the User Interface and Intermec Applications
- Use the Phone
- Use the Camera
- Use GPS
- Configure the Computer
- How to Configure the Computer
- About Intermec Settings on the Computer
- Configure the Computer Remotely with SmartSystems
- About Network Communications
- About Wireless Security
- Load a Certificate
- How to Make Your Security Choice
- Select a Funk Security Profile
- Configure WPA or WPA2 Enterprise (802.1x) Security with Funk Security
- Configure WPA or WPA2 Personal (PSK) Security with Funk Security
- Configure 802.1x Security with Funk Security
- Configure LEAP Security with Funk Security
- Configure Static WEP Security with Funk Security
- Use Open (No Security) Associations with Funk Security
- Select Microsoft as Your Security Choice
- Configure WPA or WPA2 Enterprise (802.1x) Security with Microsoft Security
- Configure WPA or WPA2 Personal (PSK) Security with Microsoft Security
- Configure 802.1x Security with Microsoft Security
- Configure Static WEP Security with Microsoft Security
- Use Open (No Security) Associations with Microsoft Security
- Manage the Computer
- Troubleshoot and Maintain the Computer
- Specifications
- Keypads and Keystrokes
Chapter 4 — Use the Camera
Document Title 51
Configure Camera Settings for Pictures and Videos
Use the Pictures & Videos application to configure the camera.
1 Tap Start > Pictures & Videos.
2 Tap the Camera icon.
3 Tap Menu.
Noise Reduction Controls the amount of noise or
graininess in the image:
• Disabled: Disables noise reduction.
• Normal: Use normal noise reduction.
• Enhanced: Enhance the nose
reduction.
Scene Settings (Continued)
Setting Description
Note: You must use Intermec Settings to configure camera settings for
reading bar codes, document imaging, or signature capture.
DRAFT