User's Manual
Table Of Contents
- Before You Begin
- About the Computer Features
- About the User Interface and Intermec Applications
- Use the Phone
- Use the Camera
- Use GPS
- Configure the Computer
- How to Configure the Computer
- About Intermec Settings on the Computer
- Configure the Computer Remotely with SmartSystems
- About Network Communications
- About Wireless Security
- Load a Certificate
- How to Make Your Security Choice
- Select a Funk Security Profile
- Configure WPA or WPA2 Enterprise (802.1x) Security with Funk Security
- Configure WPA or WPA2 Personal (PSK) Security with Funk Security
- Configure 802.1x Security with Funk Security
- Configure LEAP Security with Funk Security
- Configure Static WEP Security with Funk Security
- Use Open (No Security) Associations with Funk Security
- Select Microsoft as Your Security Choice
- Configure WPA or WPA2 Enterprise (802.1x) Security with Microsoft Security
- Configure WPA or WPA2 Personal (PSK) Security with Microsoft Security
- Configure 802.1x Security with Microsoft Security
- Configure Static WEP Security with Microsoft Security
- Use Open (No Security) Associations with Microsoft Security
- Manage the Computer
- Troubleshoot and Maintain the Computer
- Specifications
- Keypads and Keystrokes
Chapter 4 — Use the Camera
50 Document Title
Sharpness Sharpness of the image. Manual settings
are from -4 (very soft) to +4 (very sharp) in
increments of 1. Default is Auto.
Saturation Color saturation level. Manual settings
are from -4 (black and white) to +4
(maximum color) in increments of 1.
Default is Auto.
White Balance Compensates for specific lighting
conditions to produce true color images:
• Auto (default): Automatic White
Balance (AWB) control.
• Daylight: Outdoors in bright, midday
sunny conditions.
• Cloudy: Outdoors with a completely
overcast, cloudy sky.
• Tungsten: Indoors lit with tungsten
light bulbs.
• Office: Indoors lit with fluorescent
light bulbs.
Torch The state of the camera flash depending
on the lighting conditions: automatic,
on, or off.
Flash The state of the camera flash when you
take a picture: automatic, on, or off.
Flash Profile Controls the amount of flash for a
specific condition:
• 0: Reserved.
• 1 (default): Document imaging in
light to moderately light ambient
conditions.
• 2: Dark, semi-reflective environments,
such as a vehicle interior or dimly lit
room.
• 3: Dark, non-reflective large or
outdoor environments. Provides very
long flash durations.
• 4: Reserved.
Scene Settings (Continued)
Setting Description
DRAFT