User's Manual
Table Of Contents
- Before You Begin
- About the Computer Features
- About the User Interface and Intermec Applications
- Use the Phone
- Use the Camera
- Use GPS
- Configure the Computer
- How to Configure the Computer
- About Intermec Settings on the Computer
- Configure the Computer Remotely with SmartSystems
- About Network Communications
- About Wireless Security
- Load a Certificate
- How to Make Your Security Choice
- Select a Funk Security Profile
- Configure WPA or WPA2 Enterprise (802.1x) Security with Funk Security
- Configure WPA or WPA2 Personal (PSK) Security with Funk Security
- Configure 802.1x Security with Funk Security
- Configure LEAP Security with Funk Security
- Configure Static WEP Security with Funk Security
- Use Open (No Security) Associations with Funk Security
- Select Microsoft as Your Security Choice
- Configure WPA or WPA2 Enterprise (802.1x) Security with Microsoft Security
- Configure WPA or WPA2 Personal (PSK) Security with Microsoft Security
- Configure 802.1x Security with Microsoft Security
- Configure Static WEP Security with Microsoft Security
- Use Open (No Security) Associations with Microsoft Security
- Manage the Computer
- Troubleshoot and Maintain the Computer
- Specifications
- Keypads and Keystrokes
Chapter 4 — Use the Camera
Document Title 49
Scene Settings
Setting Description
Exposure Metering The area of the image the camera uses to
determine optimal exposure:
• Whole screen avg: Uses the image as a
whole.
• Center weighted avg: Uses the entire
image but places empahsis on the
center quarter of the image.
• Center 1/4 averaged (default): Uses the
center quarter of the image.
• Lower 1/4 averaged: Uses the lower
quarter of the image.
• Upper 1/4 averaged: Uses the upper
quarter of the image.
• Lower 1/2 averaged: Uses the lower
half of the image.
• Upper 1/2 averaged: Uses the upper
half of the image.
Exposure Compensation Exposure level of the image. Values are
from -2.5 (darker, underexposed) to +2.5
(lighter, overexposed) in increments of
0.5. Default is 0.
Focus Determines if the focus is continuous,
single shot, or manual. If you select
manual focus, you need to set the Focus
Distance.
Focus Distance The distance at which the camera focuses.
Values are 2.5 in, 4.5 in, 7.5 in, 1-3 ft, 3-9
ft, and Infinity (focuses the lens so that an
infinitely distant object is in focus).
Brightness Brightness level of the image. Manual
settings are from -4 (very dark) to +4 (very
light) in increments of 1. Default is Auto.
Contrast Amount of contrast in the image. Manual
settings are from -4 (least contrast) to +4
(most contrast) in increments of 1.
Default is Auto.
DRAFT