User's Manual

Chapter 1 — About the Computer Features
14 Document Title
Use the orange key and the green key to access additional
characters, symbols, and functions printed on the keypad overlay.
After you understand how to use the color-coded keys and key
sequences, you can access all of the additional features printed on the
keypad overlay.
The default setting for the Green/Orange keys is Press twice to lock.
You can also set the keys to Press once to lock if you do not want the
Green/Orange keys to lock after pressing them twice. The information
in this section assumes that you are using the default setting for the
Green/Orange keys lock options. To change the setting for the
Green/Orange keys, go to Start > Settings > System > Intermec
Settings > Device Settings > Keypad.
How to Capitalize Characters on the QWERTY Keypad
If your CN51 has the QWERTY keypad, you can capitalize characters
individually, or you can type all capital letters by enabling Caps Lock:
• To capitalize a single character, press the Shift key, and then the
character.
• To enable Caps Lock, press the Shift key and then .
• When Caps Lock is enabled, press Shift again to disable Caps Lock.
How to Use the Color-Coded Keys
You Want To Press Example
Use an orange
character or
function printed
above a key.
(LED turns on), and then
the key with the character or
function printed above it
(LED stays on).
On the alphanumeric
keypad, press , then
press to type the
number 9.
Use a green
character or
function printed
above a key.
(LED turns on), and then
the key with the character or
function printed above it
(LED stays on).
On the numeric keypad,
press , then press to
type a backslash (\).
Unlock the green or
orange key.
or once. Press or once to
unlock the key. The LED
turns off.
M
DRAFT