User's Manual
Table Of Contents
- Before You Begin
- About the Computer Features
- About the User Interface and Intermec Applications
- Use the Phone
- Use the Camera
- Use GPS
- Configure the Computer
- How to Configure the Computer
- About Intermec Settings on the Computer
- Configure the Computer Remotely with SmartSystems
- About Network Communications
- About Wireless Security
- Load a Certificate
- How to Make Your Security Choice
- Select a Funk Security Profile
- Configure WPA or WPA2 Enterprise (802.1x) Security with Funk Security
- Configure WPA or WPA2 Personal (PSK) Security with Funk Security
- Configure 802.1x Security with Funk Security
- Configure LEAP Security with Funk Security
- Configure Static WEP Security with Funk Security
- Use Open (No Security) Associations with Funk Security
- Select Microsoft as Your Security Choice
- Configure WPA or WPA2 Enterprise (802.1x) Security with Microsoft Security
- Configure WPA or WPA2 Personal (PSK) Security with Microsoft Security
- Configure 802.1x Security with Microsoft Security
- Configure Static WEP Security with Microsoft Security
- Use Open (No Security) Associations with Microsoft Security
- Manage the Computer
- Troubleshoot and Maintain the Computer
- Specifications
- Keypads and Keystrokes
Chapter 8 — Troubleshoot and Maintain the Computer
Document Title 119
• Configuration number (CN) and serial number (SN), printed on a
label inside the battery compartmentor shown on the Device
Health dashboard under Information.
• Operating system version
• Power management settings
• Wireless security settings
• Intermec Terminal Emulation (ITE) version and protocol, available
from the ITE main screen.
Or, programming language of your custom application and tools
used to create it.
Most information is available in Intermec Settings.
Locate Your Configuration Number
Before you call Intermec Product Support, you need to know the
configuration number of your computer.
1 Open the Device Health Dashboard:
• Press and then press on the numeric keypad.
• Press on the alphanumeric keypad.
2 In the Dashboard, scroll down and tap Information.
3 Scroll down until you see the Hardware Configuration number.
4 Exit the Device Health Dashboard.
Locate Your Operating System Version
Before you call Intermec Product Support, you need know the
operating system version loaded on your computer.
1 Open the Device Health Dashboard:
• Press and then press on the numeric keypad.
• Press on the alphanumeric keypad.
2 In the Dashboard, scroll down and tap Information.
3 Scroll down until you see the OS Version number.
4 Exit the Device Health Dashboard.
DRAFT