User's Manual
Table Of Contents
- Using the Data Collection PC
- Safety Information
- About the CV61 Data Collection PC
- Overview of CV61 Features
- About the Ready-to-Work Indicator
- CV61 Accessories
- Mounting the CV61
- Connecting the CV61 to Power
- Installing an SD Card
- 1 Turn off the CV61.
- 2 Remove the power cord.
- 3 Using a small Phillips screwdriver, remove the eight screws that secures the radome cover to the CV61.
- 4 Gently lift up the radome cover to expose the SD card slot.
- 5 Insert the SD card into place.
- 6 Close the radome cover and replace the ten screws.
- 7 Reattach the power cord.
- 8 Press the Power button. The computer turns on.
- Adjusting the Volume
- About the Touch Screen
- Installing an External Antenna
- Attaching an External Keyboard
- Connecting a Tethered Scanner
- 1) Attach the RS-232 cable to one of the COM ports on the CV61.
- 2) Attach the other end of the cable to a tethered scanner.
- 3) Select Start > Control Panel > Intermec Settings.
- 4) Go to Data Collection > Tethered Scanner > Enable Scanner Port.
- 5) Make sure Enable scanner port is checked.
- 6) Tap OK to save your settings.
- 7) Go to Scanner Settings > Scanner model and select your scanner from the list.
- 8) Tap OK to save your settings.
- 9) TapMenu > Exit to exit Intermec Settings.
- 1) Attach the RS-232 cable to one of the COM ports on the CV61.
- Physical and Environmental Specifications
Chapter 1 — Using the Data Collection PC
CV61 Data Collection PC User Guide 7
Mounting the CV61
To properly mount the CV61 to a desktop or vehicle, you must
purchase either a Desktop or Vehicle Mounting Kit.
There are two mounting kit options sold separately:
• Standard Vehicle Mounting Kit
• Desktop Mounting Kit
For more information on installing the mounting kits, see the CV61
Vehicle Mounting Kit Installation Instructions.
Connecting the CV61 to Power
The CV61 has an internal 9-60 VDC power supply. For the CV61 to
operate, you must provide power to the CV61 through a DC/DC power
supply or an AC/DC power supply.
There are two power options for the CV61. You must order one of
these power options separately:
• DC/DC Converter Kit (15-96 V) for non-heated displays
• AC Wall Charging Kit
Use the AC power supply and power cord when you are using the CV61
with the Desktop Mounting Kit. For more information on installing
the DC power options, see the Vehicle Power Supply Installation
Guide.
Installing an SD Card
You can use an SD card to increase file storage and install software.
The computer supports an optional 32 GB maximum capacity SD
card.
To install an SD card on the CV61:
1 Turn off the CV61.
2 Remove the power cord.