User's Manual

Chapter 6 — Configuring the Computer
70 Series Mobile Computer User’s Manual 87
After you enter a passphrase, the 70 Series internally converts it to
a pre-shared key.
This value must match the passphrase on the authenticator.
7 Save your settings.
Configuring 802.1x Security with Microsoft Security
Use the following procedure to configure 802.1x security with
Microsoft.
1 Make sure the communications and radio parameters on your 70
Series are configured.
2 Start Intermec Settings.
3 Choose Communications > 802.11 Radio > Microsoft Security.
4 For Infrastructure Mode, choose Infrastructure.
5 For Network Authentication, choose Open.
6 For Data Encryption, choose WEP.
7 For 802.1X Authentication, choose TLS or PEAP.
8 If you choose TLS:
a Choose Properties > Run App. The Auth. Settings box
appears.
b Choose Select.
c Select your certificate from the list and press Enter. The User
Logon dialog box appears.
d Enter a User Name and a Domain.
If you choose PEAP:
e Choose Properties > Run App. The Auth. Settings box appears.
f Select Validate Server and press Enter. When the radio starts
to authenticate, the Network Password dialog box appears.
g Enter a User Name and Password and select Save Password.
h (Optional) In the Domain field, enter the domain.
i Press Enter.