User's Manual

Chapter 6 — Configuring the Computer
86 70 Series Mobile Computer User’s Manual
7 If you choose TLS:
a Choose Properties > Run App. The Auth. Settings dialog box
appears.
b Choose Select.
c Select your certificate from the list and press Enter. The User
Logon dialog box appears.
d Enter a User Name and Domain and press Enter.
If you choose PEAP:
e Choose Properties > Run App. The Auth. Settings box appears.
f Choose Validate Server and press Enter. When the radio starts
to authenticate, the Network Password dialog box appears.
g Enter a User Name and Password and select Save Password.
h (Optional) In the Domain field, enter the Active Directory
domain associated with the user account.
8 Save your settings.
Enabling WPA-PSK with Microsoft Security
Use the following procedure to enable WPA-PSK with Microsoft
security.
1 Make sure the communications and radio parameters on your 70
Series are configured.
2 Start Intermec Settings.
3 Choose Communications > 802.11 Radio > Microsoft Security.
4 For Infrastructure Mode, choose Infrastructure.
5 For Network Authentication, choose WPA-PSK. Data
Encryption automatically defaults to TKIP.
6 For Pre-Shared Key, enter the pre-shared key or the passphrase.
The pre-shared key must be a value of 32 hex pairs preceded by 0x
for a total of 66 characters. The value must match the key value on
the authenticator. The passphrase must be from 8 to 63 characters.